Epofloor Ekonomik

PRODUCT INFORMATION

Adhesive for tiles and other facing materials for vertical and horizontal surfaces. It is a high-quality, single-component, gray tile adhesive enriched with additives to enhance its performance. This cement-based adhesive complies with the requirements of the AZS 039-2000 (TS 11140-1993) standard for "Cement-based (hydraulic binder) adhesives for tiles and floor tiles."

APPLICATION AREAS

This adhesive can be used for:

- Interior and exterior applications

- Bonding small and medium-sized tiles to surfaces such as concrete, plaster, and floor screeds

ADVANTAGES

- Easy to prepare and apply

- No sliding on vertical surfaces

USAGE INSTRUCTIONS

Surface Preparation: Ensure surfaces are solid, dry, clean, and properly leveled. Remove all oil and paraffin residues that may weaken adhesion. If there are cracks or voids 5-6 mm deep, they should be filled with Epocement S 40 repair mix or another standard-compliant repair mix a day before application. The surface should be primed with BINDER or another standard-compliant primer before use.

Mix Preparation: Gradually add a 25 kg powdered mix into 6.0-6.5 liters of water and mix until lumps disappear. Allow the mix to rest for 3-5 minutes, then stir again before use.

Application: Spread the mix onto the surface using the flat side of a trowel. Then, depending on the tile size, comb the applied mix with the notched side of the trowel. For large tiles, it is recommended to use the combined adhesive method (applying adhesive both on the surface and the back of the tile, then combing it). The waiting time after combing should not exceed 20 minutes. If the mix forms a crust, scrape it off, reapply the mix, and comb it again before proceeding with tiling. The prepared mix should be used within 3 hours. Do not use expired or crusted mix. Joint filling should be done after 36 hours for walls and 48 hours for floors.

Recommendations: Ensure the temperature during application is between +5°C and +30°C. Avoid using it in hot (+30°C or above), rainy, or windy conditions. Ceramics with high water absorption should be soaked in water before application. Do not add water or adhesive to expired mix. Clean all tools and equipment with water after use.

STORAGE

Store unopened bags in dry conditions on wooden pallets, with a maximum of 10 bags stacked, for up to 12 months.

WARRANTY AND TECHNICAL SUPPORT

The technical data provided is based on scientific and practical knowledge. "EPO YAPI KIMYA" is responsible for the quality and safety of the product. However, the company is not responsible for issues arising from improper use beyond the specified instructions. The company reserves the right to make changes to the product in connection with scientific and technical progress. For technical support or further information, please contact "EPO YAPI KIMYA."